Thermal & Plasma Spray Equipment

WIREJET-96 is a combustion wire spray gun which operates on a combination of clean oil-free compressed air, oxygen and acetylene. It can spray all materials which can be made into a wire, normally 1/8” in diameter. Other wire diameters such as 3/16”, 15 and 11ga can also be used by means of attachable hardware which is readily available. The standard gun is supplied with a drive suitable to spray high melting point materials, but it can be converted to a high speed spray for lower melting point materials such as zinc, aluminum and babbitt. In this case 3/16” diameter wires can be used for very high throughput. Various accessories are available such as: extensions for inside diameters; air caps with different configurations; and nozzle and siphonplug combinations for use with propane in place of acetylene.

Hipojet-2100 HVOF Powder Spray System, simple to operate, no run or ramp parameters to manipulate. HIPOJETTM-2100 Gun Simple Operation. No run or ramp arameters to manipulate. Low gun weight of less than 3 1/2 lbs making it easy for hand held use. Low maintenance and operating costs.

Powderjet-85 combustion powder spray gun that operates on oxygen, acetylene and clean oil-free compressed air. PowderJet-85 is an apirated Powder Spray Gun with an integral hopper using Oxygen and Acetylene to spray metal poswers, both p[realloyed and composites. It can be converted to spray ceramics by adding a cibrator and an airjet.

Corro-Spray wire metallizing gun for corrosion protection. corro-Spray wire metallizing gun is specially designed for high speed spray of coatings of Zinc, Zinc-Aluminum and Aluminum for corrosion protection. It is also suitable to spray Tin abd Babbitt which are low melting point materials.

Uni-Spray-Jet Powder Spray Gun with very high BTU flame for high throughputs. Uni-Spray-Jet is a Combusiton Powder Spray Gun with a very high BTU flame that contributes to high throughputs. It is a truly aspirated system that accelerates the particle velosicities to create dense, low porosity coatings.

PowderJet-86 combustion powder spray gun that operates on oxygen, acetylene and clean oil-free compressed air. PowderJet-86 is a prodcution tool designed to provide the most economical, uniofrm and high quality coatings. Importance has been placed on simplicity of design, reliability, ease of opeeration and coating repeatablility.

HighJet-2000 Electric Drive High Velocity Combustion Wire Spray System. The HiJet 2000 is a new generation High Velocity Combustion Wire Spray Systems with a supersonic flame that results in improved heating, higher bond strength, and better coating quality. At least seven shock diamonds, characteristic of a supersonic flame, are visible in the flame of this gun.

PLASMA POWDERS
& Systems Incorporated
Manufacturers of
BONDRITE Ni-Al Bonding Wire

www.plasmapowders.com

Plasma Parts Directory

2GF Flow Meter Parts
5K Combustion Wire Spray Gun Parts
5PII Combustion Powder Gun Parts
6PII Combustion Powder Gun Parts
10E Combustion Wire Gun Parts
11E Combustion Wire Gun Parts
12E Combustion Wire Gun Parts
ARC JET 95 Electric Arc Gun Parts
HP High Velocity Powder Gun Parts
HY Hybrid Water Cooled Gun Parts
MDJ Parts to Fit Metco® Diamond Jet Gun
Other Parts Miscellaneous Thermal Spray Gun Parts
PF Powder Feeder Parts
RJ Parts for Roto Jet
TOP GUN 500 Top Gun 500 Parts